| Availability: | |
|---|---|
din3055
The rope is assembled from multiple helically laid wire strands. Exact strand and wire counts require a controlled cross-section or supplier data sheet.
The pictured product can be coiled and wound onto a reel. No numerical flexibility or minimum bend radius is supplied.
A wooden reel is shown as one packaging method. Final reel type, capacity and export treatment must be agreed.
The measurement image shows approximately 8.08 mm. This supports sample inspection but does not establish nominal size or tolerance.
No end fitting is shown. The rope requires application-specific cutting, termination and installation.
RFQ category | Information required |
|---|---|
Product | Steel Wire Rope |
Nominal diameter | Specify required value and tolerance |
Construction | Strand and wire arrangement |
Core | Type and material |
Lay | Direction, classification and lay length if controlled |
Steel | Type, grade and tensile designation |
Surface | Galvanized, bright, stainless or other confirmed requirement |
Lubrication | Type and quantity if required |
Minimum breaking force | Required value and test method |
Length | Per reel and total quantity |
Length tolerance | Required limit |
Reel | Material, dimensions and maximum weight |
End condition | Cut, seized or specified termination |
Standard | Required product, test and inspection standard |
Documents | Material, construction, dimension and test certificates |
Packaging | Wrapping, labels, pallet and export requirements |
Application | Equipment, load, environment and duty cycle |
Confirmed from user input or images | Not confirmed |
|---|---|
Product name: Steel Wire Rope | Exact steel grade |
Multi-wire, multi-strand form | Galvanized, stainless or bright condition |
Helical exterior strands | Exact construction designation |
Fibrous-looking central region | Core type and material |
Silver-grey metallic appearance | Coating or lubrication |
Wooden reel shown | Length per reel and reel dimensions |
Caliper display near 8.08 mm | Nominal diameter and tolerance |
Loose coil shown | Minimum bend radius |
Cut ends shown | Minimum breaking force and working load |
No termination visible | Approved end fitting and installation method |
No standard marking visible | Applicable DIN, EN, ISO, ASTM or other standard |
The word “steel” is confirmed by the product name. No further material designation is available.
A purchase order should define:
carbon or stainless steel;
material grade;
wire tensile class;
coating type;
coating mass or thickness;
surface appearance;
lubrication;
corrosion-test requirement;
restricted-substance compliance;
material traceability.
The silver-grey appearance cannot replace these specifications.
The pictured 8.08 mm reading should be recorded as an observed sample result only. Before order approval:
confirm nominal diameter;
agree the measurement method;
state the tolerance;
verify rope roundness or ovality if required;
approve the strand construction;
confirm core type;
identify lay direction and classification;
retain an approved reference sample;
require dimensional and construction reports for production lots.
For a load-bearing steel wire rope, the buyer may need to specify:
minimum breaking force;
actual breaking-force test;
wire tensile tests;
torsion or reverse-bend tests on individual wires;
coating tests;
dimensional inspection;
unit mass;
elongation;
fatigue or bending test;
proof testing;
termination testing;
acceptance sampling.
No test values or performance claims are included because the supplied images provide none.
Define:
net rope length per reel;
permitted short lengths;
continuous-length requirement;
length-measurement method;
reel dimensions;
maximum gross weight;
reel flange protection;
end securing;
moisture barrier;
desiccant or protective wrapping, if required;
label information;
heat, lot and reel number;
barcode requirement;
export wood treatment;
palletization and container loading.
A B2B buyer may include:
purchase-order and certificate review;
reel and label verification;
diameter measurements at defined locations;
construction verification from a controlled sample;
core identification;
lay-direction and lay-length checks;
surface and coating inspection;
broken-wire and strand-condition inspection;
length and weight verification;
breaking-force test review;
packaging inspection;
lot traceability confirmation.
The acceptance criteria and sampling plan must be agreed in advance.
The supplier should be informed of:
intended equipment;
load type and maximum design load;
static or cyclic duty;
drum and sheave dimensions;
speed;
number of bends;
environmental exposure;
operating temperature;
termination method;
inspection interval;
applicable safety rules.
This information affects rope selection and cannot be replaced by photographs.
The images support describing this item as steel wire rope supplied for further integration. They do not support claiming suitability for cranes, elevators, mining, marine use, lifting slings, fall protection or other specific systems.
Any application statement on the final website should be added only after the corresponding construction, certified performance and compliance documents are available.
Only the general multi-strand form, metallic surface, reel supply, cut-end construction and one sample reading near 8.08 mm are visible.
No. Galvanizing cannot be confirmed from colour alone.
No. The supplied information states only steel wire rope.
No breaking-force data or test certificate is provided.
No product or test standard is identified in the images or supplied information.
The photograph suggests a sample around that size, but commercial size availability and nominal designation require supplier confirmation.
Provide the nominal diameter, construction, core, lay, material, finish, minimum breaking force, application, length, reel, standard, certificates, packaging, quantity and destination for an accurate quotation.
