| Availability: | |
|---|---|
din9150
Weifeng/Oem
din9150
security-focused threaded fastening;
conventional hex-tool installation before breakaway;
visible completion of the drive-section separation;
reduced ordinary-tool access after installation;
configurable material and finish subject to supplier confirmation;
potential use in permanent or restricted-maintenance assemblies.
No claim is made regarding absolute tamper resistance, structural capacity or corrosion performance.
| RFQ field | Required information |
|---|---|
| Product | DIN 9150 Shear Nut |
| Standard control | DIN edition or approved supplier/customer drawing |
| Thread | Diameter, pitch, tolerance and system |
| Dimensions | Full dimensional table or drawing |
| Mating fastener | Bolt/stud material, class and finish |
| Material | Exact grade and condition |
| Surface treatment | Coating, thickness/mass, passivation and colour |
| Lubrication | Required or prohibited condition |
| Breakaway range | Required value, tolerance and test method |
| Thread performance | Proof/load requirement if applicable |
| Corrosion performance | Test method and acceptance criterion |
| Application | Security objective and environment |
| Installation | Tool, speed and monitoring requirement |
| Inspection | Sampling plan and reports |
| Quantity | Sample, pilot and production volumes |
| Packaging | Count, labels, lot, barcode and export details |
DIN 9150 is used as the product designation in a specialist commercial listing and in the user-provided name. An official standard document, edition date and dimensional table were not available in the supplied materials.
Before purchase approval:
obtain the supplier’s DIN 9150 compliance statement;
request the controlled dimensional drawing;
identify the referenced standard edition;
compare thread and geometry with the application;
approve material and finish separately;
agree the breakaway test;
retain an approved sample.
Inspect thread, drive dimensions, shear-zone geometry, residual body, height and bearing surface against the drawing.
Install samples on the actual or representative bolt/stud and clamped components using the intended tool.
Record the installation response and verify separation within the agreed range and at the intended location.
Check residual-body seating, fracture appearance, thread condition and damage to mating components.
Evaluate the completed assembly, including the opposite bolt head and surrounding access.
Review material, finish, inspection and test records before volume production.
Commercial shear nuts can exist in different material and finish variants. The target product must therefore be controlled through purchase-order data.
Request as applicable:
material certificate;
hardness report;
heat-treatment record;
coating certificate;
coating measurement;
passivation/topcoat declaration;
corrosion-test report;
restricted-substance declaration;
lot traceability.
No A2 stainless, zinc or galvanized specification is assigned unless ordered and confirmed.
A test plan should define:
sample size per lot;
mating fastener used for testing;
test fixture and bearing surface;
thread condition;
lubrication and environmental condition;
tightening tool and calibration;
tightening rate;
measured breakaway value;
permitted range;
acceptable fracture location;
residual-body acceptance;
treatment of failed lots.
Supplier and buyer must use the same method if results are to be comparable.
verify part number and lot;
check packaging labels;
gauge internal threads;
inspect dimensions against drawing;
examine the shear zone for damage;
inspect the drive flats;
verify material and finish documents;
conduct sample breakaway tests;
inspect post-shear residual geometry;
retain records and reference samples.
Packaging should protect threads, drive flats, shear zones and finishes from deformation and corrosion. The RFQ may specify:
counted bags or boxes;
separators or protective trays;
thread protection;
moisture barrier;
desiccant or corrosion-inhibiting packaging if approved;
part number and thread labels;
lot and heat numbers;
barcode;
customer branding;
carton weight limit;
pallet and export markings.
MOQ, packaging availability and lead time require supplier confirmation.
After validation, buyers may consider shear nuts for gates, fencing, barriers, signage, public fixtures, access-control equipment and protective panels. These are category examples only; exact application approval remains the buyer’s responsibility.
| Confirmed | Not confirmed |
|---|---|
| DIN 9150 Shear Nut designation | Official standard edition |
| Internal threaded security nut concept | Thread sizes and tolerances |
| Hexagonal temporary drive | Across-flats dimensions |
| Reduced breakaway section | Breakaway torque range |
| Tapered/rounded residual body | Full dimensional range |
| Tamper-resistant purpose | Absolute removal resistance |
| Controlled shear-off installation | Material and heat treatment |
| Commercial use in security applications | Target finish and corrosion result |
| Difficult-to-remove final form | Proof load or structural capacity |
Thread, drawing, material, finish, required breakaway range, mating fastener, application, quantity, tests, documents and packaging.
A commercial listing identifies an A2 DIN 9150 variant, but target availability and exact specification must be confirmed.
No value has been provided. It must be agreed for the exact size, material and finish.
Obtain the relevant standard edition or supplier drawing before approval.
The breakaway design is intended for a permanent or restricted-removal installation; reuse is not supported.
Packaging requirements can be included in the RFQ, subject to supplier confirmation.
Provide the DIN reference, thread, drawing or sample, material, finish, shear range, mating fastener, application, quantity, quality documents, packaging and destination for an accurate offer.
