| Availability: | |
|---|---|
din9150
Weifeng/Oem
din9150
The nut contains a central internal thread for engagement with a compatible bolt, stud or threaded component. Thread diameter, pitch, tolerance and usable engagement length are not confirmed.
Before installation is complete, the hexagonal section provides flats for a standard wrench or socket. This drive section is temporary and forms part of the controlled breakaway design.
A narrowed transition separates the drive section from the residual body. This zone is intended to fail under a defined tightening condition. No numerical shear torque is available for the target item.
After the drive section breaks away, a tapered or rounded body remains. Its external form offers less conventional wrench engagement than an ordinary hex nut.
Match the nut thread to the mating bolt or stud.
Start the nut by hand to avoid cross-threading.
Tighten the hexagonal drive section with the specified tool.
Continue using the approved installation procedure.
The drive section separates at the designed shear zone.
Inspect the residual body and joint seating.
Record completion where installation traceability is required.
The final tightening procedure, tool, speed and shear acceptance criteria must be validated for the exact supplied product.
creates a permanent or difficult-to-remove threaded connection;
removes the normal hexagonal drive after installation;
discourages unauthorized loosening with common hand tools;
provides a visible indication that the breakaway installation step occurred;
supports security-focused assemblies where routine removal is not intended.
A shear nut is tamper-resistant, not absolutely tamper-proof. Security performance depends on the complete assembly, access conditions and removal methods available.
Subject to engineering and project approval, DIN 9150 shear nuts may be considered for:
gates and fence systems;
security barriers;
public-area fixtures;
access-control equipment;
sign and equipment mounting;
protective covers;
utility or infrastructure hardware;
assemblies where unauthorized removal should be discouraged.
No suitability is claimed for a specific load-bearing, structural, automotive, railway or other regulated application without supporting data.
No material or finish has been provided for the target product. Commercial shear nuts may be offered in more than one material or finish, but this does not identify the requested item.
The RFQ should state:
required base material;
material grade or property class;
surface coating or uncoated condition;
corrosion-resistance requirement;
coating thickness or mass, if controlled;
passivation or post-treatment;
colour and appearance requirements;
material and finish certificates;
restricted-substance requirements.
Do not select material or finish solely from a reference photograph.
| Specification | Status |
|---|---|
| Product name | DIN 9150 Shear Nut |
| Product function | Breakaway security nut |
| Thread | Internal female thread; exact designation not provided |
| Drive | Temporary hexagonal drive section |
| Breakaway feature | Reduced shear zone |
| Residual form | Tapered/rounded low-grip body |
| DIN designation | DIN 9150 supplied and found in a commercial listing |
| Standard revision | Not confirmed |
| Dimensions | Not provided |
| Shear torque | Not provided |
| Material | Not provided |
| Surface treatment | Not provided |
| Mechanical performance | Not provided |
The nut is not described as reusable after the drive section shears.
It should not be treated as a conventional service-removable nut.
The breakaway function does not establish joint preload without validated data.
No vibration-resistance claim is made.
No load capacity or proof strength is stated.
Removal may require destructive or specialist methods and should be planned before installation.
thread gauging;
drive-section dimensions;
shear-zone geometry;
residual-body profile;
concentricity and visual defects;
material and surface verification;
sample shear testing under an agreed method;
post-shear residual-body inspection;
lot traceability and packaging labels.
Its hexagonal drive section is designed to shear away after tightening, leaving a body that is more difficult to grip with ordinary tools.
No. The required torque value and tolerance must be supplied or confirmed by testing.
The design is intended to restrict normal removal. A project-specific removal plan should be established before use.
The designation is supplied in the product name and appears in a commercial fastener listing. The exact revision and dimensional requirements still require documentary confirmation.
No material is confirmed for the target product.
Provide the thread, drawing or sample, material, finish, required shear condition, mating fastener, application, quantity, inspection method, certificates and packaging requirements.
