| Availability: | |
|---|---|
din9150
Weifeng/Oem
din9150
The hexagonal section supports ordinary installation tooling before final breakaway.
The reduced neck is designed to separate when the specified installation condition is reached.
The remaining external profile provides fewer conventional wrenching surfaces than a standard hex nut.
A missing drive section can provide a visible indication that the shear stage occurred, although it does not by itself prove correct preload or security performance.
Before approving the product, determine:
what type of tampering must be discouraged;
who requires authorized future access;
whether the joint is permanent or replaceable;
how the nut will be removed for legitimate maintenance;
whether destructive removal can damage adjacent parts;
what thread and engagement length are required;
whether the joint carries structural load;
what environmental exposure applies;
what breakaway condition is required;
what inspection record is necessary.
After engineering review, shear nuts may be considered for:
perimeter fencing;
gates and access-control barriers;
street or facility signage;
public furniture and fixtures;
protective guards and covers;
utility cabinets;
equipment mounted in accessible locations;
tamper-resistant brackets;
security-sensitive infrastructure hardware.
The available information does not approve the target product for any specific sector or load class.
The nut must engage a compatible bolt or stud with adequate usable thread. No minimum engagement is specified here.
The supporting surface should be compatible with the nut’s underside and any specified washer. Bearing geometry is not shown in a controlled drawing.
The hexagonal drive must remain accessible until breakaway. Tool clearance should be included in the assembly design.
After separation, the remaining body must not interfere with moving parts, guards or adjacent components.
Because the ordinary drive is removed, authorized disassembly may require destructive or specialist methods. The maintenance plan should identify how the fastener and surrounding components will be protected.
confirm the approved product and mating fastener;
inspect threads and joint surfaces;
install any specified washer or bearing component;
hand-start the shear nut;
engage the hexagonal drive with the approved tool;
tighten according to the validated process;
continue until controlled separation occurs;
inspect seating and fracture condition;
record installation where required;
retain or dispose of the separated drive section according to site procedure.
No material or surface treatment is confirmed for the target item. Application engineers should define them according to:
environmental exposure;
mating-fastener material;
corrosion risk;
mechanical requirement;
desired service life;
appearance;
coating friction;
compliance and documentation needs.
No generic “outdoor,” “marine” or “high-strength” claim is made.
A shear nut can increase resistance to casual or opportunistic removal, but its effectiveness depends on:
access around the residual body;
available cutting or gripping tools;
bolt-head security;
strength of the clamped components;
visibility and surveillance;
adjacent fastener design;
removal time and noise tolerance.
If the opposite bolt head remains easy to turn, the overall assembly may still be vulnerable. Security must be evaluated at system level.
| Category | Required confirmation |
|---|---|
| DIN reference | Exact DIN 9150 edition or approved drawing |
| Thread | Diameter, pitch and tolerance |
| Dimensions | Drive, neck, body, height and bearing face |
| Material | Grade and condition |
| Finish | Coating, passivation and lubrication |
| Breakaway behaviour | Range and test method |
| Thread/load performance | Required values and tests |
| Environment | Corrosion and temperature conditions |
| Removal plan | Authorized method |
| Application approval | Engineer/customer sign-off |
dimensional inspection;
fit check with production bolts or studs;
sample installation using planned tools;
breakaway testing;
inspection of residual geometry;
joint seating evaluation;
environmental or corrosion testing where required;
tamper-resistance review of the full assembly;
authorized removal trial;
final drawing and process approval.
No. It is designed to make ordinary removal more difficult, not to guarantee absolute resistance to every tool or method.
No. The complete joint must address access to the bolt or stud and all other fasteners.
No structural load data are supplied. Suitability requires engineering evidence.
It is generally better suited to permanent or restricted-access joints. The service strategy must be considered first.
Not by itself. A validated relationship between the product, friction conditions and joint must be established.
Provide the assembly drawing, security objective, thread, load, material, finish, environment, breakaway requirement, installation process, removal plan and quantity.
