loading
| Availability: | |
|---|---|
The product integrates the nut and thimble-like bearing profile into one component. In an assembly designed for this arrangement, the integrated geometry can simplify the connection and reduce the number of separate parts.
The female thread allows the fitting to be mounted at the exposed end of a compatible bolt passing through a pole, crossarm or structural member. The final installation must provide sufficient thread engagement and correct load alignment.
The curved profile supports the connected strand or loop over a broader path than a narrow edge. This helps control bending and contact stress when the product and strand have been correctly matched.
Eye style, thread and part marking can be defined in the purchase specification, helping warehouse and field teams identify the intended fitting for each pole line assembly.
RFQ field | Information required from buyer |
|---|---|
Product | Thimble Eye Nut |
Eye type | Single, twin, long, angle, oval-thimble or drawing-defined form |
Thread | Diameter, thread form, pitch, class and handedness if relevant |
Mating hardware | Bolt or threaded-rod specification |
Strand or fitting | Type and nominal size |
Material | Required grade or supplier proposal subject to approval |
Manufacturing process | Specify if forging or another process is required |
Surface treatment | Required coating and corrosion performance |
Dimensions | Drawing, part number or dimensional schedule |
Mechanical rating | Required test basis and acceptance value |
Marking | Size, logo, part number, batch or rating requirements |
Documentation | Material, coating, dimensional or test records |
Packaging | Quantity per package, labels and pallet requirements |
Use the following template when requesting a quotation:
Product: Thimble Eye Nut
Eye configuration: [single / twin / long / angle / drawing]
Thread: [diameter, form and pitch]
Mating bolt: [specification]
Strand or connector: [type and size]
Material: [required grade or supplier to propose]
Surface treatment: [required process]
Mechanical requirement: [proof, tensile or project rating]
Applicable standard: [utility, customer or national standard]
Quantity: [pieces]
Inspection documents: [required records]
Marking: [part number, logo or batch]
Packing: [bulk / bag / box / crate / pallet]
Destination: [country or port]
Application: [pole line, guying, dead-end or other use]
Thimble eye nuts may be considered for:
overhead electrical distribution lines;
telecommunications and aerial cable poles;
guy strand and down-guy assemblies;
dead-end and strain connections;
pole and crossarm through-bolt terminations;
line hardware repair and maintenance inventories;
utility contractor project kits;
compatible agricultural trellis and tension-wire systems.
The complete assembly must be designed and approved for the intended load and environment.
A single eye provides one strand or connector attachment point. Confirm the eye opening, groove profile and orientation.
A twin configuration may provide two connection positions. The load-sharing method and permitted loading arrangement must be defined by the project drawing.
A longer body can be used where additional clearance or a specific pole-line geometry is required. Do not substitute it for a standard-length product without dimensional review.
An angled eye changes the orientation between the thread and connection point. Use only where the drawing and load path call for that geometry.
Product names vary between markets. A dimensioned drawing or approved part number is the safest way to prevent configuration errors.
Thimble eye nuts are commonly used outdoors, where corrosion protection is important. However, this page does not assign a specific material or coating to the WF Fastener supply scope.
Buyers should define:
base material and grade;
required forging or manufacturing process;
coating type and applicable specification;
minimum coating thickness, where relevant;
thread allowance after coating;
corrosion test requirement;
handling and appearance criteria;
restrictions for coastal, industrial or chemically exposed environments.
Do not rely on the phrase “galvanized” alone. The coating process and acceptance criteria must be stated when performance is critical.
A safe mechanical rating cannot be inferred from thread size or appearance. If proof, tensile or breaking-load performance is required, specify:
the applicable standard or approved drawing;
the loading direction and fixture;
the required test value and unit;
sampling frequency;
acceptance and rejection criteria;
whether testing is destructive or non-destructive;
required test records or third-party witnessing;
traceability from the test sample to the production lot.
Any rating published on the final product page should come from verified data for the exact supplied model.
The purchase specification may require:
thread go/no-go gauging;
eye opening and groove-profile measurement;
dimensional inspection against the drawing;
visual inspection for cracks, folds, laps and deformation;
material verification;
coating thickness or adhesion checks;
mechanical testing under an agreed method;
marking and batch-traceability review;
assembly fit checks with the mating bolt and strand;
pre-production sample approval;
final packaging inspection.
Only tests and documents agreed before production should be considered part of the supply scope.
The curved eye and internal threads should be protected during bulk handling. Packaging can be designed around part weight, coating sensitivity, carton limits and field distribution needs.
Possible RFQ requirements include:
protective bags or separators;
bulk cartons or heavy-duty crates;
thread protection where necessary;
quantity labels and barcodes;
project, part-number and batch identification;
customer branding;
pallet dimensions and maximum gross weight;
moisture protection for sea freight.
WF Fastener’s website states that custom packaging and label design services are available. Exact feasibility, minimum quantity, cost and lead time require confirmation.
Match the thread to the specified bolt or rod.
Confirm full thread engagement.
Seat the strand or connector correctly in the curved eye.
Align the fitting with the intended load path.
Avoid side load, twist and sharp contact unless approved.
Inspect the thread, eye and coating before installation.
Do not weld, heat, bend or grind the fitting in the field.
Replace fittings showing cracks, permanent deformation, heavy corrosion or severe groove wear.
Follow the utility owner’s installation and inspection procedure.
Not automatically. It is generally pole line or guying hardware. It must not be used for overhead lifting unless the exact product has verified lifting approval and data.
The supply scope must be stated in the quotation. Do not assume that the bolt, strand, insulator or connecting fitting is included.
Applicable requirements vary by market, utility and design. Provide the customer standard, national standard, drawing or approved part number.
Custom requirements may be submitted for feasibility review, but availability should not be assumed before supplier confirmation.
The allowable or tested load must be confirmed for the exact model, material, thread, manufacturing process, load direction and test method.
Send the drawing, part number, eye configuration, thread, mating bolt, strand size, material, coating, required mechanical rating, quantity, documentation and packaging requirements through the WF Fastener contact page.
